| Product | Pahlen Titanium T28 – 28kW – Length = 470mm, Pahlen Titanium T40 – 40kW – Length = 510mm, Pahlen Titanium T75 – 75kW – Length = 754mm, Pahlen Titanium Hi-Flow Plastic Case HTT40 – 40kW – Length = 417mm, Pahlen Titanium Hi-Flow Plastic Case HTT75 – 75kW – Length = 667mm |
|---|
Pahlen Titanium & Hi Flow Heat Exchangers
$0.00
A heat exchanger is used to transfer heat energy from one medium to another without the two media being mixed. Pahlén heat exchangers with cross flow operation produce high output and have excellent heat transfer capability. All the models can be installed and connected to electric, firewood, pellet or oil-fired boilers, and to a heat pump and solar panel systems.
- Additional information
- Models T28kW / T40kW / T75kW
- Models HTT 40kW / HTT 75kW
- Downloads
- Reviews (0)
- Inquiry form
Models T28kW / T40kW / T75kW
Heat exchanger Hi-Flow titanium
Heat exchanger Hi-flow titanium is a spiral heat exchanger made of titanium for the most demanding installations where there is a high risk of corrosion. Titanium is ideal for swimming pools with salt water or where a salt generator/chlorinator is used. Maximum pressure secondary circuit (pool water) is 5 bar and primary circuit (hot water) is 30 bar. Hi-Flow is a spiral heat exchanger made of titanium, the ideal material when a salt chlorinator is used.
Suitable for pools up to 300m3
Adjustable stainless-steel attachments are included. Capacity range 13-75kW.
Features
• Titanium
• Coil for the heating medium
• Connections with interior thread (secondary side)
• Pocket for probe
• Adjustable brackets of acid-resistant stainless steel
• Three sizes 28, 40 and 75 kW
• Connects to existing heat source
• Mounted horizontally
Models HTT 40kW / HTT 75kW
Heat exchanger Hi-Temp titanium
Hi-Temp titanium is a spiral heat exchanger made of thermoplastic with a high glass content for extra durability. With a coil of titanium for the most demanding installations
where there is a high risk of corrosion, such as in pools with salt water or where a salt chlorinator is used.
Maximum pressure secondary circuit (pool water) is 4 bar and primary circuit (hot water) is 5 bar.
Suitable for pools up to 300 m3.
Features
• Outer jacket of thermoplastic
• Hot water coil made of titanium
• Integrated wall-mounting
• Slip connections for bonding of Ø 50 mm pipes
• Two sizes 40 and 75kW
• Connects to existing heat source
• Mounted horisontally or vertically
Reviews
There are no reviews yet.